Skip to main content

Operators

ClickHouse transforms operators to their corresponding functions at the query parsing stage according to their priority, precedence, and associativity.

Access Operators​

a[N] – Access to an element of an array. The arrayElement(a, N) function.

a.N – Access to a tuple element. The tupleElement(a, N) function.

Numeric Negation Operator​

-a – The negate (a) function.

For tuple negation: tupleNegate.

Multiplication and Division Operators​

a * b – The multiply (a, b) function.

For multiplying tuple by number: tupleMultiplyByNumber, for scalar product: dotProduct.

a / b – The divide(a, b) function.

For dividing tuple by number: tupleDivideByNumber.

a % b – The modulo(a, b) function.

Addition and Subtraction Operators​

a + b – The plus(a, b) function.

For tuple addiction: tuplePlus.

a - b – The minus(a, b) function.

For tuple subtraction: tupleMinus.

Comparison Operators​

equals function​

a = b – The equals(a, b) function.

a == b – The equals(a, b) function.

notEquals function​

a != b – The notEquals(a, b) function.

a <> b – The notEquals(a, b) function.

lessOrEquals function​

a <= b – The lessOrEquals(a, b) function.

greaterOrEquals function​

a >= b – The greaterOrEquals(a, b) function.

less function​

a < b – The less(a, b) function.

greater function​

a > b – The greater(a, b) function.

like function​

a LIKE s – The like(a, b) function.

notLike function​

a NOT LIKE s – The notLike(a, b) function.

ilike function​

a ILIKE s – The ilike(a, b) function.

BETWEEN function​

a BETWEEN b AND c – The same as a >= b AND a <= c.

a NOT BETWEEN b AND c – The same as a < b OR a > c.

Operators for Working with Data Sets​

See IN operators and EXISTS operator.

in function​

a IN ... – The in(a, b) function.

notIn function​

a NOT IN ... – The notIn(a, b) function.

globalIn function​

a GLOBAL IN ... – The globalIn(a, b) function.

globalNotIn function​

a GLOBAL NOT IN ... – The globalNotIn(a, b) function.

in subquery function​

a = ANY (subquery) – The in(a, subquery) function.

notIn subquery function​

a != ANY (subquery) – The same as a NOT IN (SELECT singleValueOrNull(*) FROM subquery).

in subquery function​

a = ALL (subquery) – The same as a IN (SELECT singleValueOrNull(*) FROM subquery).

notIn subquery function​

a != ALL (subquery) – The notIn(a, subquery) function.

Examples

Query with ALL:

SELECT number AS a FROM numbers(10) WHERE a > ALL (SELECT number FROM numbers(3, 3));

Result:

┌─a─┐
│ 6 │
│ 7 │
│ 8 │
│ 9 │
└───┘

Query with ANY:

SELECT number AS a FROM numbers(10) WHERE a > ANY (SELECT number FROM numbers(3, 3));

Result:

┌─a─┐
│ 4 │
│ 5 │
│ 6 │
│ 7 │
│ 8 │
│ 9 │
└───┘

Operators for Working with Dates and Times​

EXTRACT​

EXTRACT(part FROM date);

Extract parts from a given date. For example, you can retrieve a month from a given date, or a second from a time.

The part parameter specifies which part of the date to retrieve. The following values are available:

  • DAY — The day of the month. Possible values: 1–31.
  • MONTH — The number of a month. Possible values: 1–12.
  • YEAR — The year.
  • SECOND — The second. Possible values: 0–59.
  • MINUTE — The minute. Possible values: 0–59.
  • HOUR — The hour. Possible values: 0–23.

The part parameter is case-insensitive.

The date parameter specifies the date or the time to process. Either Date or DateTime type is supported.

Examples:

SELECT EXTRACT(DAY FROM toDate('2017-06-15'));
SELECT EXTRACT(MONTH FROM toDate('2017-06-15'));
SELECT EXTRACT(YEAR FROM toDate('2017-06-15'));

In the following example we create a table and insert into it a value with the DateTime type.

CREATE TABLE test.Orders
(
    OrderId UInt64,
    OrderName String,
    OrderDate DateTime
)
ENGINE = Log;
INSERT INTO test.Orders VALUES (1, 'Jarlsberg Cheese', toDateTime('2008-10-11 13:23:44'));
SELECT
    toYear(OrderDate) AS OrderYear,
    toMonth(OrderDate) AS OrderMonth,
    toDayOfMonth(OrderDate) AS OrderDay,
    toHour(OrderDate) AS OrderHour,
    toMinute(OrderDate) AS OrderMinute,
    toSecond(OrderDate) AS OrderSecond
FROM test.Orders;
┌─OrderYear─┬─OrderMonth─┬─OrderDay─┬─OrderHour─┬─OrderMinute─┬─OrderSecond─┐
│      2008 │         10 │       11 │        13 │          23 │          44 │
└───────────┴────────────┴──────────┴───────────┴─────────────┴─────────────┘

You can see more examples in tests.

INTERVAL​

Creates an Interval-type value that should be used in arithmetical operations with Date and DateTime-type values.

Types of intervals:

  • SECOND
  • MINUTE
  • HOUR
  • DAY
  • WEEK
  • MONTH
  • QUARTER
  • YEAR

You can also use a string literal when setting the INTERVAL value. For example, INTERVAL 1 HOUR is identical to the INTERVAL '1 hour' or INTERVAL '1' hour.

Tip

Intervals with different types can’t be combined. You can’t use expressions like INTERVAL 4 DAY 1 HOUR. Specify intervals in units that are smaller or equal to the smallest unit of the interval, for example, INTERVAL 25 HOUR. You can use consecutive operations, like in the example below.

Examples:

SELECT now() AS current_date_time, current_date_time + INTERVAL 4 DAY + INTERVAL 3 HOUR;
┌───current_date_time─┬─plus(plus(now(), toIntervalDay(4)), toIntervalHour(3))─┐
│ 2020-11-03 22:09:50 │                                    2020-11-08 01:09:50 │
└─────────────────────┴────────────────────────────────────────────────────────┘
SELECT now() AS current_date_time, current_date_time + INTERVAL '4 day' + INTERVAL '3 hour';
┌───current_date_time─┬─plus(plus(now(), toIntervalDay(4)), toIntervalHour(3))─┐
│ 2020-11-03 22:12:10 │                                    2020-11-08 01:12:10 │
└─────────────────────┴────────────────────────────────────────────────────────┘
SELECT now() AS current_date_time, current_date_time + INTERVAL '4' day + INTERVAL '3' hour;
┌───current_date_time─┬─plus(plus(now(), toIntervalDay('4')), toIntervalHour('3'))─┐
│ 2020-11-03 22:33:19 │                                        2020-11-08 01:33:19 │
└─────────────────────┴────────────────────────────────────────────────────────────┘
Note

The INTERVAL syntax or addDays function are always preferred. Simple addition or subtraction (syntax like now() + ...) doesn't consider time settings. For example, daylight saving time.

Examples:

SELECT toDateTime('2014-10-26 00:00:00', 'Asia/Istanbul') AS time, time + 60 * 60 * 24 AS time_plus_24_hours, time + toIntervalDay(1) AS time_plus_1_day;
┌────────────────time─┬──time_plus_24_hours─┬─────time_plus_1_day─┐
│ 2014-10-26 00:00:00 │ 2014-10-26 23:00:00 │ 2014-10-27 00:00:00 │
└─────────────────────┴─────────────────────┴─────────────────────┘

See Also

Logical AND Operator​

Syntax SELECT a AND b — calculates logical conjunction of a and b with the function and.

Logical OR Operator​

Syntax SELECT a OR b — calculates logical disjunction of a and b with the function or.

Logical Negation Operator​

Syntax SELECT NOT a — calculates logical negation of a with the function not.

Conditional Operator​

a ? b : c – The if(a, b, c) function.

Note:

The conditional operator calculates the values of b and c, then checks whether condition a is met, and then returns the corresponding value. If b or C is an arrayJoin() function, each row will be replicated regardless of the “a” condition.

Conditional Expression​

CASE [x]
    WHEN a THEN b
    [WHEN ... THEN ...]
    [ELSE c]
END

If x is specified, then transform(x, [a, ...], [b, ...], c) function is used. Otherwise – multiIf(a, b, ..., c).

If there is no ELSE c clause in the expression, the default value is NULL.

The transform function does not work with NULL.

Concatenation Operator​

s1 || s2 – The concat(s1, s2) function.

Lambda Creation Operator​

x -> expr – The lambda(x, expr) function.

The following operators do not have a priority since they are brackets:

Array Creation Operator​

[x1, ...] – The array(x1, ...) function.

Tuple Creation Operator​

(x1, x2, ...) – The tuple(x2, x2, ...) function.

Associativity​

All binary operators have left associativity. For example, 1 + 2 + 3 is transformed to plus(plus(1, 2), 3). Sometimes this does not work the way you expect. For example, SELECT 4 > 2 > 3 will result in 0.

For efficiency, the and and or functions accept any number of arguments. The corresponding chains of AND and OR operators are transformed into a single call of these functions.

Checking for NULL​

ClickHouse supports the IS NULL and IS NOT NULL operators.

IS NULL​

  • For Nullable type values, the IS NULL operator returns:
    • 1, if the value is NULL.
    • 0 otherwise.
  • For other values, the IS NULL operator always returns 0.

Can be optimized by enabling the optimize_functions_to_subcolumns setting. With optimize_functions_to_subcolumns = 1 the function reads only null subcolumn instead of reading and processing the whole column data. The query SELECT n IS NULL FROM table transforms to SELECT n.null FROM TABLE.

SELECT x+100 FROM t_null WHERE y IS NULL
┌─plus(x, 100)─┐
│          101 │
└──────────────┘

IS NOT NULL​

  • For Nullable type values, the IS NOT NULL operator returns:
    • 0, if the value is NULL.
    • 1 otherwise.
  • For other values, the IS NOT NULL operator always returns 1.
SELECT * FROM t_null WHERE y IS NOT NULL
┌─x─┬─y─┐
│ 2 │ 3 │
└───┴───┘

Can be optimized by enabling the optimize_functions_to_subcolumns setting. With optimize_functions_to_subcolumns = 1 the function reads only null subcolumn instead of reading and processing the whole column data. The query SELECT n IS NOT NULL FROM table transforms to SELECT NOT n.null FROM TABLE.